数控摇摆水型装置

二维两翼喷泉装置(2D)

华信双喷头二维喷泉装置配备两个 DN50 出水口,上轴可实现 360° 旋转,适用于音乐喷泉、舞动喷泉及水秀项目。

首页 » 喷泉设备 » 数控摇摆水型装置 » 二维两翼喷泉装置(2D)

数控摇摆水型装置

二维两翼喷泉装置(2D)

在一个设备安装位置实现两种喷头配置。

The Huaxin Dual-Nozzle 2D Fountain Unit carries two selected nozzles on a shared dual-axis mechanism. Two DN50 outlets and a 360° upper-axis rotation range give fountain designers more options for combining nozzle shapes and programmed movement in musical fountains, dancing fountains, and water shows.

Two DN50 nozzle outlets · Dual-axis movement · 360° upper-axis rotation · SUS304

Why Choose the Dual-Nozzle Version?

Two Nozzle Positions on One Drive

Fit selected nozzles to the two DN50 outlets to bring different water-pattern options into one equipment position. A straight jet and a fan jet, for example, provide a defined stream and a broad water sheet within the same drive assembly.

Wider Directional Options for Choreography

The upper axis has a full 360° rotation range, while a separate lower drive provides the second movement axis. Coordinating these axes allows the nozzle assembly to change orientation through programmed sequences, expanding the options for moving water effects.

Nozzle and Drive Selection from One Manufacturer

Huaxin manufactures core fountain equipment in-house. Our team can coordinate the nozzle pair, hydraulic requirements, movement clearance, and control configuration against your project drawings, so the supplied assembly fits the intended show and installation.

摆动方式与水型效果

“Dual-nozzle” describes the two nozzle positions; “2D” describes the two controlled movement axes. Both nozzle positions are carried by the same mechanism, with the upper and lower drives coordinated through the fountain control system.

Watch the dual-nozzle unit in operation and explore water-effect examples from the 2D range. Final effects depend on the selected nozzles, hydraulic arrangement, equipment layout, and programming.

Nozzle Combinations

Straight Jet + Fan Jet

A straight jet produces a defined water stream, while a fan jet produces a broad, fan-shaped sheet. Installing the selected pair on the two nozzle positions gives the show design two distinct water forms to work with.

Confirm the nozzle pairing, required flow and head, and operating sequence for the project. Allow sufficient clearance for both fitted nozzles throughout the programmed movement.

技术参数与尺寸

参数Dual-nozzle version
驱动结构Dual-nozzle dual-axis swivel drive (2D)
材质SUS304 不锈钢
外形尺寸(长 × 宽 × 高)441 × 244 × 786 mm
净重35 kg
Nozzle outlet connections2 × DN50, male thread
进水口接口DN65,内螺纹
Indicative jet height*10–15 m
上轴旋转范围360°
Output torque, upper / lower axis85 / 120 N·m
减速比1:10
Motor power, upper / lower axis200 / 250 W
电机工作电压AC 55–70 V
电机电缆2 × JHS, 4 × 2.5 mm²
传感器电缆2 × JHSP, 3 × 1.5 mm²
传感器供电电压24 V DC

Jet height is indicative and depends on nozzle selection, pump flow and head, and operating conditions.

相关二维喷泉装置

Huaxin dual-axis fountain swivel drive with an internal slip ring

二维喷泉装置(2D)— 内置电环型

立式双轴装置,采用内置电环设计,与卧式版本相比,占用的平面安装空间更小。

二维喷泉装置(2D)— 外置电环型

一款立式二维喷泉装置,配备外置电环,进出水接口均为 DN50 内螺纹。

Huaxin low-profile dual-axis fountain unit

卧式二维喷泉装置(2D)

A lower-height design for fountain layouts with restricted vertical installation space.

Huaxin integrated 2D fountain unit with DMX512 control and RGB lighting

二维喷泉装置(2D)— 集成型

Dual-axis movement with integrated DMX512 control and RGB lighting for coordinated water-and-light sequences.

Huaxin triple-nozzle 2D fountain unit with three DN50 nozzle outlets

二维三翼喷泉装置(2D)

三个喷头出口扩展了单台双轴驱动设备的喷头配置选择,可用于编排多样化的喷泉水型。

为您的项目选配这款设备

Send your fountain layout, required quantity, preferred nozzle combination, target jet height, and control requirements. Huaxin can help confirm the nozzle arrangement, hydraulic conditions, and movement clearance before preparing a quotation.

地址

中国四川省内江市经开区安泰街399号

Phone / WhatsApp / WeChat / Telegram / Zalo

0086 18816238859

关注我们

请输入您的全名。
This field is required.
请输入公司名称。
This field is required.
请输入有效的电话号码。
This field is required.
请详细描述您的需求。
This field is required.
This field is required.
滚动至顶部