СИСТЕМЫ УПРАВЛЯЕМЫХ ПОДВИЖНЫХ СТРУЙ

ДВУХСОПЛОВЫЙ ДВУХОСЕВОЙ ПОВОРОТНЫЙ ПРИВОД (2D)

Huaxin dual-nozzle 2D fountain unit with two DN50 outlets and 360° upper-axis rotation for musical fountains, dancing fountains, and water shows.

СИСТЕМЫ УПРАВЛЯЕМЫХ ПОДВИЖНЫХ СТРУЙ

ДВУХСОПЛОВЫЙ ДВУХОСЕВОЙ ПОВОРОТНЫЙ ПРИВОД (2D)

Two nozzle configurations at one equipment position.

The Huaxin Dual-Nozzle 2D Fountain Unit carries two selected nozzles on a shared dual-axis mechanism. Two DN50 outlets and a 360° upper-axis rotation range give fountain designers more options for combining nozzle shapes and programmed movement in musical fountains, dancing fountains, and water shows.

Two DN50 nozzle outlets · Dual-axis movement · 360° upper-axis rotation · SUS304

Why Choose the Dual-Nozzle Version?

Two Nozzle Positions on One Drive

Fit selected nozzles to the two DN50 outlets to bring different water-pattern options into one equipment position. A straight jet and a fan jet, for example, provide a defined stream and a broad water sheet within the same drive assembly.

Wider Directional Options for Choreography

The upper axis has a full 360° rotation range, while a separate lower drive provides the second movement axis. Coordinating these axes allows the nozzle assembly to change orientation through programmed sequences, expanding the options for moving water effects.

Nozzle and Drive Selection from One Manufacturer

Huaxin manufactures core fountain equipment in-house. Our team can coordinate the nozzle pair, hydraulic requirements, movement clearance, and control configuration against your project drawings, so the supplied assembly fits the intended show and installation.

Движение и водные эффекты

“Dual-nozzle” describes the two nozzle positions; “2D” describes the two controlled movement axes. Both nozzle positions are carried by the same mechanism, with the upper and lower drives coordinated through the fountain control system.

Watch the dual-nozzle unit in operation and explore water-effect examples from the 2D range. Final effects depend on the selected nozzles, hydraulic arrangement, equipment layout, and programming.

Nozzle Combinations

Straight Jet + Fan Jet

A straight jet produces a defined water stream, while a fan jet produces a broad, fan-shaped sheet. Installing the selected pair on the two nozzle positions gives the show design two distinct water forms to work with.

Confirm the nozzle pairing, required flow and head, and operating sequence for the project. Allow sufficient clearance for both fitted nozzles throughout the programmed movement.

Технические характеристики и размеры

ХарактеристикаDual-nozzle version
Схема приводаDual-nozzle dual-axis swivel drive (2D)
МатериалНержавеющая сталь SUS304
Габаритные размеры (Д × Ш × В)441 × 244 × 786 mm
Масса нетто35 kg
Nozzle outlet connections2 × DN50, male thread
Соединение входного отверстия для водыDN65, внутренняя резьба
Indicative jet height*10–15 m
Диапазон вращения верхней оси360°
Output torque, upper / lower axis85 / 120 N·m
Передаточное отношение редуктора1:10
Motor power, upper / lower axis200 / 250 W
Рабочее напряжение двигателяAC 55–70 V
Кабели для двигателей2 × JHS, 4 × 2.5 mm²
Кабели для датчиков2 × JHSP, 3 × 1.5 mm²
Напряжение питания датчика24 V DC

Jet height is indicative and depends on nozzle selection, pump flow and head, and operating conditions.

Связанные 2D-фонтанные модули

Huaxin dual-axis fountain swivel drive with an internal slip ring

Установка 2D — Внутренний токосъёмник

Thiết bị hai trục dạng đứng, sử dụng vòng tiếp điện bên trong và có diện tích chiếm chỗ trên mặt bằng nhỏ hơn so với phiên bản dạng thấp.

Блок 2D — Внешнее контактное кольцо

Вертикальная двухосевая фонтанная установка с внешним токосъёмником и входным и выходным соединениями DN50 с внутренней резьбой.

Huaxin low-profile dual-axis fountain unit

Двухосевой Поворотный Привод (2D) — Низкопрофильный

A lower-height design for fountain layouts with restricted vertical installation space.

Huaxin integrated 2D fountain unit with DMX512 control and RGB lighting

Двухосевой Поворотный Привод (2D) — Интегрированный

Dual-axis movement with integrated DMX512 control and RGB lighting for coordinated water-and-light sequences.

Huaxin triple-nozzle 2D fountain unit with three DN50 nozzle outlets

Трёхсопловый Двухосевой Поворотный Привод (2D)

Три выходных отверстия расширяют возможности конфигурации сопла в рамках одного двухосевого устройства, позволяя создавать хореографические фонтанные эффекты.

Укажите этот блок для вашего проекта

Send your fountain layout, required quantity, preferred nozzle combination, target jet height, and control requirements. Huaxin can help confirm the nozzle arrangement, hydraulic conditions, and movement clearance before preparing a quotation.

АДРЕС

Китай, пров. Сычуань, г. Нэйцзян, Зона экономического развития, ул. Аньтай, 399

Телефон / WhatsApp / WeChat / Telegram / Zalo

0086 18816238859

ПОДПИСЫВАЙТЕСЬ

Пожалуйста, введите ваше полное имя.
Это поле обязательно к заполнению.
Пожалуйста, введите название вашей компании.
Это поле обязательно к заполнению.
Пожалуйста, введите корректный номер телефона.
Это поле обязательно к заполнению.
Пожалуйста, подробно опишите ваши требования.
Это поле обязательно к заполнению.
Это поле обязательно к заполнению.
Прокрутить вверх