СИСТЕМЫ УПРАВЛЯЕМЫХ ПОДВИЖНЫХ СТРУЙ

ТРЁХСОПЛОВЫЙ ДВУХОСЕВОЙ ПОВОРОТНЫЙ ПРИВОД (2D)

Huaxin triple-nozzle 2D fountain unit with three DN50 outlets, dual-axis movement and 360° rotation for musical fountains and choreographed water shows.

СИСТЕМЫ УПРАВЛЯЕМЫХ ПОДВИЖНЫХ СТРУЙ

ТРЁХСОПЛОВЫЙ ДВУХОСЕВОЙ ПОВОРОТНЫЙ ПРИВОД (2D)

Three nozzle positions for more varied water effects.

The Huaxin Triple-Nozzle 2D Fountain Unit combines three DN50 nozzle outlets with controlled swinging and rotary movement. Its shared dual-axis mechanism carries a selected nozzle combination through programmed sequences, giving designers more water-pattern options at one equipment position for musical fountains, dancing fountains, and water shows.

Three DN50 nozzle outlets · Dual-axis movement · 360° rotation range · SUS304

Why Choose the Triple-Nozzle Version?

More Water-Pattern Options at One Position

Three nozzle positions allow a defined jet, a broad water sheet, and a multi-stream effect to be configured on the same assembly. This makes the triple-nozzle version an option for show designs that call for several distinct water forms at a single equipment location.

Swinging and Rotary Motion in One Unit

The dual-axis drive combines directional swing with rotary movement to change the orientation of the nozzle assembly. A specified 360° rotation range supports full-circle movement sequences, adding another way to develop the selected water effects through programming.

Nozzle Combinations Matched to the Project

Huaxin manufactures core fountain equipment in-house. Our team can coordinate the three-nozzle arrangement, hydraulic requirements, installation clearance, and control configuration with your project drawings, helping match the supplied equipment to the intended performance.

Движение и водные эффекты

“Triple-nozzle” refers to the three nozzle positions, while “2D” refers to the two controlled movement axes. All three nozzle positions are carried by the shared mechanism, with the fountain control system coordinating the drive movements.

Use the operation video to review the triple-nozzle unit’s motion, then explore water-effect examples from the 2D range. Final effects depend on nozzle selection, hydraulic arrangement, equipment layout, and programming.

Nozzle Combinations

Select the nozzle combination according to the required water forms, available flow and head, and intended operating sequence. Check clearance with all three nozzles fitted throughout the programmed movement.

Huaxin DN40 adjustable straight jet fountain nozzle

Прямоструйное сопло

Produces a defined water stream for directional sweeps and moving-jet arrangements.

Huaxin fan jet fountain nozzle with a fan-shaped outlet

Веерное сопло

Produces a broad, fan-shaped sheet of water for a fuller visual surface.

Huaxin finger jet fountain nozzle with multiple outlets for separate water streams

Пальчиковое сопло

Produces several distinct streams in a fan-shaped arrangement for layered water effects.

Технические характеристики и размеры

ХарактеристикаTriple-nozzle version
Схема приводаTriple-nozzle dual-axis swivel drive (2D)
МатериалНержавеющая сталь SUS304
Габаритные размеры (Д × Ш × В)466 × 384 × 800 mm
Масса нетто40 kg
Nozzle outlet connections3 × DN50
Соединение входного отверстия для водыDN50, внутренняя резьба
Indicative jet height*5–15 m
Specified rotation range360°
Output torque, upper / lower axis120 / 85 N·m
Передаточное отношение редуктора1:10
Общая номинальная мощность600 W
Рабочее напряжение двигателяAC 55–70 V / DC 60–90 V
Кабели для двигателей2 × JHS, 4 × 2.5 mm²
Кабели для датчиков2 × JHSP, 3 × 1.5 mm²
Напряжение питания датчика24 V DC

Высота струи является ориентировочной величиной и зависит от выбора насадки, производительности и напора насоса, а также от условий эксплуатации. Проверьте соответствие электрической конфигурации и совместимость системы управления для конкретного устройства.

Связанные 2D-фонтанные модули

Huaxin dual-axis fountain swivel drive with an internal slip ring

Установка 2D — Внутренний токосъёмник

Thiết bị hai trục dạng đứng, sử dụng vòng tiếp điện bên trong và có diện tích chiếm chỗ trên mặt bằng nhỏ hơn so với phiên bản dạng thấp.

Блок 2D — Внешнее контактное кольцо

Вертикальная двухосевая фонтанная установка с внешним токосъёмником и входным и выходным соединениями DN50 с внутренней резьбой.

Huaxin low-profile dual-axis fountain unit

Двухосевой Поворотный Привод (2D) — Низкопрофильный

A lower-height design for fountain layouts with restricted vertical installation space.

Huaxin integrated 2D fountain unit with DMX512 control and RGB lighting

Двухосевой Поворотный Привод (2D) — Интегрированный

Dual-axis movement with integrated DMX512 control and RGB lighting for coordinated water-and-light sequences.

Huaxin dual-nozzle 2D fountain unit with two DN50 nozzle outlets

Двухсопловый Двухосевой Поворотный Привод (2D)

Два выходных отверстия на двухосевом приводе — для выбора различных комбинаций сопел и создания водных эффектов, направленных в разные стороны.

Укажите этот блок для вашего проекта

Send your fountain layout, required quantity, preferred nozzle combination, target jet height, and control requirements. Huaxin can help review the three-nozzle arrangement, hydraulic conditions, and movement clearance before preparing a quotation.

АДРЕС

Китай, пров. Сычуань, г. Нэйцзян, Зона экономического развития, ул. Аньтай, 399

Телефон / WhatsApp / WeChat / Telegram / Zalo

0086 18816238859

ПОДПИСЫВАЙТЕСЬ

Пожалуйста, введите ваше полное имя.
Это поле обязательно к заполнению.
Пожалуйста, введите название вашей компании.
Это поле обязательно к заполнению.
Пожалуйста, введите корректный номер телефона.
Это поле обязательно к заполнению.
Пожалуйста, подробно опишите ваши требования.
Это поле обязательно к заполнению.
Это поле обязательно к заполнению.

Прокрутить вверх