MOTION-CONTROLLED JET SYSTEMS

Triple-Nozzle Single-Axis Swivel Drive (1D)

Huaxin triple-nozzle 1D fountain unit switches among three water effects with 120° nozzle spacing and a single-axis drive for musical fountains.

Home » Fountain Equipment » Motion-Controlled Jet Systems » 1D Fountain Unit — Triple-Nozzle

Huaxin triple-nozzle 1D swing fountain unit for switching among three water effects

Drive-side view of a Huaxin triple-nozzle 1D fountain unit showing the drive housing and cable connections

Angled view of a Huaxin triple-nozzle 1D fountain unit with three outlets and a mounting bracket

MOTION-CONTROLLED JET SYSTEMS

Triple-Nozzle Single-Axis Swivel Drive (1D)

Three water effects. One programmable axis.

The Huaxin Triple-Nozzle 1D Fountain Unit carries three selectable nozzle positions spaced 120° apart. Its programmable single-axis drive selects one position at a time, allowing musical fountains, dancing fountains, and water shows to switch among three water patterns from one equipment assembly.

Three selectable nozzles · 120° nozzle spacing · DN50 connections · SUS304

Request a Quote

Why Choose the Triple-Nozzle Version?

Three DN50 nozzle outlets spaced 120 degrees apart on a Huaxin triple-nozzle 1D fountain unit

Three Water Patterns Within the Show

Keep three compatible nozzles installed and select the required position through programming. A straight jet, fan jet, and finger jet combination allows one fountain position to alternate between a defined stream, a broad water sheet, and multiple separate jets during the show.

Multiple distinct water streams arranged in a fan-shaped pattern, produced by a Huaxin finger jet fountain nozzle.

Fan-shaped water sheet produced by a Huaxin fan jet fountain nozzle

Huaxin 1D swing fountain equipment producing a programmed water effect

Defined Nozzle Positions for Show Programming

The three nozzle positions are arranged at 120° intervals on a shared single-axis drive. These defined positions allow nozzle selection to be planned within the movement sequence and coordinated with other fountain units and lighting cues.

huaxin-fountain-equipment-production-workshop-01

Nozzle and Mounting Support from the Manufacturer

Huaxin manufactures core fountain equipment in-house. Our team can coordinate the three-nozzle combination, connections, mounting arrangement, and control requirements against your project drawings, helping match the supplied unit to the intended water effects.

Nozzle Selection & Water Effects

“Triple-nozzle” refers to the three selectable nozzle positions, while “1D” refers to the single controlled movement axis. The drive moves the nozzle assembly and selects one position at a time to change the active water effect.
Final effects depend on the selected nozzles, hydraulic conditions, equipment arrangement, and programming.

Swinging water-jet effect produced by Huaxin single-axis fountain equipment

Nozzle Combinations

A compatible straight jet, fan jet, and finger jet combination provides three distinct water forms for the programmed sequence.

Select the specific nozzles according to the required water forms, available flow and head, and installation clearance. Confirm the connection arrangement for each nozzle and allow clearance for the complete assembly throughout its movement.

Huaxin DN40 adjustable straight jet fountain nozzle

Straight Jet Nozzle

Produces a defined water stream for directional swinging effects.

Huaxin fan jet fountain nozzle with a fan-shaped outlet

Fan Jet Nozzle

Produces a broad, fan-shaped sheet of water.

Huaxin finger jet fountain nozzle with multiple outlets for separate water streams

Finger Jet Nozzle

Produces multiple separate streams arranged in a fan-shaped pattern.

Technical Specifications & Dimensions

Specification	Triple-nozzle 1D version
Drive arrangement	Triple-nozzle single-axis swivel drive (1D)
Nozzle selection	One of three nozzle positions at a time
Nozzle spacing	120° between positions
Material	SUS304 stainless steel
Listed drive dimensions (L × W × H)	360 × 250 × 145 mm
Net weight	20 kg
Nozzle outlet connections	3 × DN50, male thread
Water inlet connection	DN50, male thread
Indicative jet height	5–15 m
Output torque	85 N·m
Gear reduction ratio	1:10
Motor rated power	200 W
Motor operating voltage	AC 55–70 V / DC 60–90 V
Motor cable	JHS, 4 × 2.5 mm²
Sensor cable	JHSP, 3 × 1.5 mm²
Sensor supply voltage	24 V DC

Jet height is indicative and depends on nozzle selection, pump flow and head, and operating conditions. Confirm the electrical configuration and control compatibility for the specified unit.

Related 1D Units

Huaxin standard 1D swing fountain unit shown with a mounting bracket and no nozzle

Standard 1D Unit

Single-axis movement with DN40 and DN50 options.

Huaxin integrated 1D swing fountain unit with DMX512 control and RGB lighting

Integrated 1D Unit

Integrated DMX512 control and RGB lighting.

Huaxin dual-nozzle 1D swing fountain unit for switching between two water effects

Dual-Nozzle 1D Unit

Selects between two nozzle positions for different water effects.

Specify This Unit for Your Project

Send your fountain layout, required quantity, the three intended water effects, target jet height, and control requirements. Huaxin can help confirm the nozzle combination, mounting arrangement, hydraulic conditions, and quotation.

Address

No. 399, Antai Street, Economic Development Zone, Neijiang City, Sichuan Province, China.

Phone / WhatsApp / WeChat / Telegram / Zalo

0086 18816238859

sales@huaxinfountains.com

Full Name

Please enter your full name.

This field is required.

Company Name

Please enter your company name.

This field is required.

Phone Number

Please enter a valid phone number.

This field is required.

Email Address

Please enter a valid email address.

This field is required.

Requirements

Please describe your requirements in detail.

This field is required.

URL

This field is required.