FLAME & IMPACT EFFECT SYSTEMS

Water & Flame Fusion Jet

A fountain effect unit combining water and flame in one visual composition, with SUS304 construction and a maximum water jet height of 6 m.

Home » Fountain Equipment » Flame & Impact Effect Systems » Water & Flame Fusion Jet
Huaxin water and flame fusion jet unit mounted on a stainless steel frame
Huaxin water and flame fusion jet unit mounted on a stainless steel frame

FLAME & IMPACT EFFECT SYSTEMS

Water & Flame Fusion Jet

Bring Water and Fire Together in One Fountain Effect.

The Huaxin water and flame fusion jet combines a water column and flame in one coordinated fountain effect. Designed for outdoor musical fountains and multimedia water shows, it adds a distinctive visual accent to performances with water, light, and music.

Built with SUS304 stainless steel, the unit connects to a project-specific water supply, central gas supply, and fountain control system. Its water jet can reach a specified maximum height of 6 metres.

Water and flame in one effect · SUS304 construction · Water jet height up to 6 m

Request a Quote

A Water and Fire Fountain Effect for Outdoor Shows

A water and fire fountain creates contrast within a fountain performance by bringing two elements into the same visual composition. The water and flame fusion jet is designed to produce this effect from a dedicated unit, making it suitable for use as a focal point or as part of a sequence across a larger fountain layout.

It can be incorporated into musical fountains, dancing fountains, and multimedia water shows, with water and flame cues coordinated around the project’s overall show design.

Water and fire fountain effect created by a Huaxin water and flame fusion jet
Water and flame effects combined in a fountain display
Water and fire fountain effect created by a Huaxin water and flame fusion jet
Water and flame effects combined in a fountain display

Why Choose the Huaxin Water & Flame Fusion Jet?

Water and Flame in One Composition

The unit brings a water column and flame together in one fountain effect. This creates a distinctive feature that can be used to highlight key moments in a performance.

Built for Fountain Installations

The equipment uses SUS304 stainless steel construction, with seamless stainless steel pipework specified for the system. The water pump, gas supply, and control connections are planned around the fountain installation.

Flexible Show Integration

Use individual units as visual accents or arrange multiple units within a fountain composition. Their operation can be coordinated with the wider fountain sequence through a compatible project control system.

Project-Specific System Planning

Gas supply pipe size, equipment arrangement, and control connections depend on the site and number of units. Huaxin can help review these requirements when planning the system.

See the Water and Flame Effect in Motion

Water and flame create a changing visual effect that is best understood in motion. Watch the video to see how the two elements come together during operation.

Equipment and System Configuration

Water & Flame Fusion Jet Unit

The fusion jet combines the components needed to create the water and flame effect within one equipment assembly. Its SUS304 stainless steel construction is suited to fountain system installations.

Water Supply

The unit is connected to the fountain water supply and pump system. The specified maximum water jet height is 6 m; the actual effect depends on the selected pump and project conditions.

Central Gas Supply

The flame effect is supplied through a central gas system. Gas pipework, valves, and the gas supply location are selected and installed according to the project layout and local requirements.

Ignition and Control

The system includes ignition and gas solenoid valve components. Electrical connections and control requirements should be confirmed alongside the fountain controller and the selected project configuration.

Request a System Configuration

Technical Specifications

General
ItemSpecification
MaterialSUS304 stainless steel
Overall Dimensions (L × W × H)605 × 315 × 900 mm
Net Weight23.8 kg
Ignition System
ItemSpecification
Ignition Coil Voltage220 V
Ignition Coil Current1.4 A
Ignition Coil Power300 W
Gas Supply Control
ItemSpecification
Gas Solenoid Valve Voltage220 V
Gas Solenoid Valve Current0.2 A
Gas Solenoid Valve Power50 W
Maximum Gas Solenoid Valve Pressure0.8 MPa
Water System
ItemSpecification
Water Pump Voltage380 V
Maximum Water Jet Height6 m
Pipework
ItemSpecification
Pipe MaterialSUS304 seamless stainless steel pipe
Main Pipe SizeDetermined by site conditions

The maximum gas solenoid valve pressure is a component rating. Confirm the operating gas pressure, pump selection, electrical supply, and system configuration for each project.

Request Technical Details

Installation, Gas Supply & Control

The water and flame fusion jet is designed for outdoor fountain installations. Plan the unit position, water supply, and central gas supply together with the fountain layout and operating conditions.

The operating water level should be approximately 50 mm below the nozzle, and the water depth should be no less than 500 mm. Confirm the installation elevation and water level during project design.

The gas supply location, main pipe size, and connections should be determined for the site. Gas pipework, valves, and pressure gauges should be installed and pressure-tested by qualified professionals before operation. Outdoor wind conditions should also be considered when positioning the effect.

Discuss Installation Requirements

Frequently Asked Questions

A water and fire fountain effect combines flowing water and flame in the same visual composition. The water and flame fusion jet is a dedicated unit designed to create this effect within a fountain show.

The specified maximum water jet height is 6 m. Actual height depends on the water supply, pump selection, and operating conditions.

The system uses a central gas supply. The gas source, pipework, and valves need to be planned around the installation site and the number of units.

The operating water level should be approximately 50 mm below the nozzle, with a water depth of at least 500 mm. Confirm the final installation elevation with the project design.

Yes. Multiple units can be arranged within a fountain layout. The gas supply, water supply, and electrical control should be configured around the number of units and the intended show sequence.

The water and flame effect can be incorporated into a coordinated fountain show. The control interface and programming requirements should be confirmed for the specific project.

Explore More Fountain Effects

Huaxin flame jet unit with a vertical burner and stainless steel support frame

Flame Jet

Add vertical flame effects to musical fountains and outdoor water shows.

Huaxin compressed-air water cannon with a vertical nozzle and pressure vessel

Compressed-Air Water Cannon

Creates short, forceful water bursts for rhythmic accents in a fountain composition.

Plan a Water and Fire Fountain Effect

Whether you are adding a single feature or planning a larger musical fountain, Huaxin can help you review the equipment and system requirements.

Share your fountain layout, desired quantity, water depth, and project location with our team. We can discuss the water supply, gas supply, and control configuration for your installation.

Address

No. 399, Antai Street, Economic Development Zone, Neijiang City, Sichuan Province, China.

Phone / WhatsApp / WeChat / Telegram / Zalo

0086 18816238859

Email

sales@huaxinfountains.com

Follow Us:

Please enter your full name.
This field is required.
Please enter your company name.
This field is required.
Please enter a valid phone number.
This field is required.
Please describe your requirements in detail.
This field is required.
This field is required.
Scroll to Top